Tus neeg siv phau ntawv

10/2021 · User Manual Version 1.0 · valid from firmware version 3.1.22
22
WEBLOG 250
In the sheet “Export Filter” you can set the maximum numbers for the data in the exports by defining the
maximum storage number, the maximum tariff number and the maximum subdevice to be included in the
export files. The default value for the storage number is 1, which implies that only data with storage number
0 (actual value) and 1 (normally the yearly due-date value) are exported. The default value for tariff is 3 and
for subdevice it is 2.
The button “Export configs” leads to the configuration of exports. Here you define which data
shall be exported.
The most important values energy and volume are selected in the above example. There are further
possibilities to choose the data of all meters (All) or meters from a predefined filter (Filter, e.g. all electricity
meters) or meters from a specific group or tenant. The created export config can be saved under a name for
further use with “Save”. The button “Run” starts the export immediately: