Tus neeg siv phau ntawv

10/2021 · User Manual Version 1.0 · valid from firmware version 3.1.22
12
WEBLOG 250
If the WebLog contains an optional WIFI module, the signal quality (0 to 100%) is shown in the wireless
information area. A web browser can access the WebLog via network after the network configuration has
been done correctly. From this point you can continue the configuration using a web browser (e.g. Firefox).
Now you should set the internal real time clock in the WebLog:
The button “Date and Time“ leads to the time menu, whose exact settings are important for the
time points for the logging and exports of the WebLog.
If the option “automatic date and time setting (network required)” is activated, the WebLog synchronizes the
internal clock once per day with the clock of a time server in the Internet. By a click on the button with the
three points you can change the predefined time server - for example if the device is operated in
a local network with its own time server. The button “Save“ stores the time settings.
4.1.2 Important logger settings
You should set the M-Bus baudrates before starting the automatic search for connected meters in the WebLog.
Please go back to the main menu with the “Back” or “Home” button in the status line.
You can go to the M-Bus basic settings with the button “Logger settings”. The menus for
management of users and log intervals can be also be started from this submenu.