Use and Care Manual

3
STEP 1 STEP 2
1
2
A
Attach the Back Cushion (1) to the Seat Cushion (2)
using two M8 x 25mm screws with locking nuts (A).
To tighten use the Large Wrench (J) and the 6mm
Allen Wrench (H). Using a low table or a box as shown
below may help
with this step.
B
2
1
Attach the Back Cushion (1) to the Base (2) using two
M8 x 60mm screws (B) and the 8mm Allen Wrench ( I ).
STEP 3
Attach the Right and Left Armrests (3) using four
M6 x 20mm screws (D) and the 6mm Allen Wrench (H).
Screw the Back Tension Knob (7) into the Seat
Cushion (2) as shown below.
STEP 4
Attach the Ottoman Frame (5) to the Ottoman Base (6)
with four M8 x 35mm screws (E), four Large Washers (F)
and the 6mm Allen Wrench (H).
D
3 (right)
3 (left)
7
E
F
6
5