User Manual

8
Rekonfpv.com
2. UART2 uses receiver
S5 is a soft serial port, dedicated to video transmission (VTX) FM
CLI command of soft serial port:
‘’resource MOTOR 5 none
resource SERIAL_TX 11 B03
SAVE‘’
6.WIFI function instruciton
1.Click Select Ports
2.Install Speedy Bee on your mobile phone. Connect to WIFI name
Started with HermesXXXX.
3.Then click connect to adjust the parameters normally.
4.If the WIFI module light is solid, it means the WIFI is connected to the
mobile phone.
。
5.If the WIFI module light is solid, but conection is abnormal. Please
check your wifi / Speedy Bee settings.
Note: Flight Controller must be powered by battery to connect to WIFI