AC Controller--ShowDoc

Under LoRaWAN, ABP is SPI=02，OTAA is SIP=03，SF is configurable.
In LoRaWAN mode, users can decide whether to modify APPEUI and appKEY as needed. Just keep consistent
with LoRaWAN server. Other relevant parameters do not need much attention. LoRaWAN server will perform rate
adaptive ADR operation (automatically modify frequency point, SF and power) according to communication
quality.
In ABP mode, the appKEY of the device is used to configure appKEY and networksKEY. The two KEYs are shared.
The main related configuration items for general users are as follows:
* reporting cycle lft: data uploading period.
* detection cycle lcp: that is, the check period. The equipment reads the relay status according to this cycle.
FPort：1
FRMPayload：sensor data(Message)
Refer to Rejeee Sensor Data Format。
3.3.3 Terminal parameter description
4.Wireless Data Format
4.1 SIP（02/03）— LoRaWAN