Operating instructions

Customer-specific impressions

P : 26 ... P : 29

-------------------

NO/TXT NEXT MODE

Impressions P : 26 ... P : 29 = customer-specific

P:26 ... P:29 are intended for individual, customer-specific impressions.

Each impression can have two lines with up to 20 characters in each.

Characters can be entered as follows:

Select impression required (P:26 ... P:29)

Press [ NO/TXT ] :

The top line of the display shows 'INPUT - MODI TEXT 01'

MODI TEXT 01 = first entry block (10 characters) in the top line

MODI TEXT 02 =

second entry block (10 characters) in the top line

MODI TEXT 03 =

first entry block (10 characters) in the bottom line

MODI TEXT 04 =

second entry block (10 charac.) in the bottom line

To change from one entry block to the next, press [ NEXT ]

Using [ VARY ] , a block is selected for entry or changing,

you can then enter characters with [ DEC ] or [ INC ]

The following characters are avaibable:

0 ... 9 Ç Ä Å É Æ Ö Ü £ Ø Ñ Á À ¥

A ... Z Ê È Ó Ú € Í $ & * + , - . / : @

[ RIGHT ] is used to select the next entry position

Press [ RETURN ] to go back to the previous menu

The customer-specific impressions P:26 ... P:29 have

the fields Date 2 , Time 2, Numbering device 2 and

Pre-text assigned to them. When using a PC-Set,

the appropriate fields can be individually entered in these

impressions, and then selected for data entry.

If you have any questions, please contact your dealer.

Note