Operating instructions

6
Place jetStamp in the charging station and load accumulators
Observe the following guidelines:
• Hook jetStamp to the notch (9) and place it in the charging station
• Fully charge the accumulators to begin with. We recommend
charging the accumulators for around 16 hours continuously,
e.g. overnight, for the first time. After this, between four and six
hours is required for charging.
• Accumulators charge status is indicated in the display
in the top right hand corner by the symbol
• While charging process the green charge status indicator (3)
lights up in the charging station
• Do not expose jetStamp to direct sunlight
(For ambient temperature see page 28, 'Technical data')
3
9