Operating instructions

19
Dirt and dried up ink at the holder
of the ink cartridge can be removed
with a soft cleaning cloth moistened
in spirit (see figure1)
Insert the new ink cartridge:
Take the ink cartridge from the
packaging and remove the coloured
protection film from the ink cartridge
(see figure 2)
Take the small felt plate and put
the felt side to the nozzle plate
of the ink cartrige for approx. two
seconds until a little bit of ink
is at the felt
Put in the new ink cartridge
into the ink cartridge holder
Push the locking clip downward
until it engages, by this means
the ink cartridge will be locked
(see figure 3)
When jetStamp is in the
charging station, a cleaning
sequence for the ink cartridge
can be activated by pressing
[ CLEAN ]
If necessary, press [ MODE ]
repeatedly until [ CLEAN ]
appears in the menu bar.
i
Note
2
3
1