Operating instructions

35
Display
Cause Recommendation
CHArGE bAT
EMPTY bAT
InSErT
CHIPCArd
InSErt CArd
FAstEr
Display is
dark
Error 02
Error 04
Error 08
Accumulator is charging,
device is not ready for
operation
Accumulator is
discharged
Chip card was not or
incorrectly inserted
Chip card was incorrectly
inserted or
Chip card was inserted but
not deep enough (not to
the stop)
•
Accumulator operation:
Accumulator is
discharged
• Mains operation:
Technical malfunction
Set number of imprint
is not available
EEProm fault
Imprint exeeds maximum
width of 60 mm
Connect device to mains.
Device is ready after
approx. 15 minutes
Connect device to mains.
Device is ready after approx.
15 minutes. Accumulator is
fully charged after 20 hours
Insert chip card correctly
(insert it smooth to
the stop)
Insert chip card correctly
(insert it smooth to
the stop)
Connect device to main.
It is ready after approx.
15
minutes, accumulator is
fully
charged after 20 hours
Call technical service or
competent distributor
Enter a valid imprint
(see page 13 ... 17)
Press [ set ] and
re-enter date and time
Press [ set ] and
shorten the imprint,
e g deactivate pre text
User’s hints and error codes