Operating instructions

b) Setting Switch line = 1 (standard setting)

With this setting, after every stamping the machine

automatically switches to the next print line, and at

the same time automatically changes line.

Push a document against depth stop and trigger

the stamping operation.

Line 1 will be printed.

The display switches to TEXT LinE 2

Move the document against the stop again and trigger

another stamping

Line 2 will be printed

The Display returns to the selected imprint and the

depth stop returns to print line 1 position.

Using the [ line ] key, it is also possible to switch

manually to print line 2. In this case, the feed unit

does not change the position of the depth stop.

After stamping the machine automatically switches

to print line 1

c) Setting Switch line = 2

With this setting, after every stamping the machine

automatically switches to the next print line.

There is no automatically change of the position

of the depth stop

Note