Operating instructions

b) Setting Switch line = 1

With this setting, Line 2 could printed as often as you

want until the [ line ] key is pressed again to return

to line 1 of the selected imprint

The printing process can be triggered as described

on page 30, a

c) Setting Switch line = 2

With this setting, after every stamping the machine

automatically switches to the next line

Printing of the second print line with Model 787

Model 787 contains a standard function for

‘semiautomatic two-line stamping’

A solenoid has been added to the depth stop to create

a stop unit. Using the standard setting (Setting ‘Switch

line = 0’) , the depth stop will be moved automatically

to a predefined line-spacing distance for stamping the

second print line (see also page 38, ‘Technical data’)

a) Setting Switch line = 0

This setting provides the same function as described

on page 30, a

There is no line shifting

Note