Operating instructions

Imprint examples:

second print line (line 2)

first print line (line 1)

Printing of the second print line (Line 2)

The second print line can only be printed by Model 785 and 787.

Using Settings, the various types of line switching can be

selected and adjusted (see page 25, ‘switch line’)

An individual, second line of text can be stored on the chip card.

This text can be printed alone, or added to an imprint stored

either in the machine or on the chip card. To do so, the

chip - card function must be active and the chip card

must be inserted in the machine (see page 22, ‘chip card’)

Printing of the second print line with Model 785

a) Setting Switch line = 0

Press the key [ line ] : The Display shows:

TEXT LInE 2

If the [ line ] is pressed again before stamping

was triggered, this display is erased and line 1 of the

the set imprint is shown again

Move a document to required printing position and

trigger stamping operation.

After stamping, the display automatically shows the

selected imprint again.

If you want to print the second line again,

[ line ] has to be pressed again

123456

29. MAY 2008 09:38

FURTWANGEN

SCHWARZWALD

Note