Operating instructions

28
Additional functions in Model 785 + 787
Chip card functions
By using the programmable REINER chip cards, the Model 785
and 787 can be extended with the following functions:
To use these functions, chip card function must be active
(see page 22, Settings, CHIPCArd on)
• Key function (printing disable) (see page 29)
•
Printing a supplementary operator’s identification (see page 29)
• Individual imprint, stored on the chip card (see page 29)
• Additional second print line (see page 30)
Insert the chip card smooth to the stop:
The chip must be facing to the operator.
Insert the chip card vertically into the slot and after
a noticeable resistance push it down smooth to the stop.
The currently set imprint appears in the display.
i
Note
Chip
i
Note