Operating instructions

The following menu ‘Settings’ features various adjustments

and configuration options of Multi Printer.

To call this menu, keep [ mode ] pressed for at least

five seconds until SETTInGS appears in the display.

If PASS 0000 appears, this menu is protected by a password.

Enter the password via [ set ] and [ mode ] .

Description of the key-functions in menu:

[ line ] calling a displayed menu level

[ set ] setting of numerical values

[ mode ] setting of non-numeric values. If a numerical

value is displayed, the various digits will be called

[ n / r ] exit the menu

Settings

Keep [ mode ] pressed for

at least 5 sec. If necessary,

enter password

[ line ]

[ mode ]

[ line ]

[ mode ]

[ line ]

[ mode ]

see next page

Settings

Chip card (on / off)

on = Multi Printer with chip card reader

(only selectable with 785 + 787)

off = Multi Printer without chip card reader

(press [ mode ] to switch over)

Imprint selectable

available imprints = 00 ... 40

Radio clock (on / off)

on =

radio clock active (only with 785 + 787)

off = radio clock deactivated

Note