User`s guide

22 16012-101 Rev. C
Printer Data
Printing the Examination Information
Select an examination file by tapping on the examination name and make sure the printer is powered on. Point the
Pachymeter infrared (IR) port towards the printer’s IR port and then tap Print. The Pachymeter’s IR port has a dispersion
angle of about 90 degrees side to side and must be pointing at and within about 3 feet (1m) of the printer’s IR port.
NOTE: A Canon PIXMA iP-90 printer should be used for best results. Alternatively an IR to parallel printer adapter such
as the ACTiSYS ACT-IR100N can be used. Other printers or adapters have not been tested and correct results cannot
be assured. The ACTiSYS adapter can be purchased from ACTiSYS web site at: www.actisys.com. Always confirm
the printed record with the electronic data on the IOPac before using the data for diagnostic purposes.
Printing Multiple Exams at One Time
In the Exams List screen, select multiple exams by pressing on one exam and dragging the stylus through the desired
exams. You will be advised as to how many exams you selected. Tap PRINT then tap OK and the exams will be printed.
Sample CCT Examination Print-out