Product Manual

ManualsBrandsREI ManualsFarm + AcreageDigital Roof-Mount AM/FM/WB/AUX Radio — 12/24V, Universal Antenna

Radio Engineering Industries, Inc.

www.radioeng.com

Rev A.1 Date: 11-19-19

12/24V Heavy Duty Compact AM/FM Stereo Weather Band Radio

w/Front-Panel Auxiliary Input

Installation/ Operation Manual

50W x 2 ST-1050

Summary of content (6 pages)

PAGE 1
2/24V Heavy Duty Compact AM/FM Stereo Weather Band Radio w/Front-Panel Auxiliary Input Radio Engineering Industries, Inc. www.radioeng.com Rev A.
PAGE 2
NOTES: Thank you for purchasing the ST-1050 AM/FM Weather Band Receiver from REI. This product is designed and tested to withstand temperature and vibration extremes. Please read the owner’s manual carefully before attempting to install this unit.
PAGE 3
CONTROLS AND INDICATORS 1. Power On/Off Button 2. Volume/Select Knob 3. Auto Store / Preset Scan Button 4. Preset Memory/Recall and Weather Band Select Buttons 5. Band Select Button 6. Radio Station Tune/Seek Buttons 7. Clock Button 8. Mode Button 9. Radio Scan Button 10.
PAGE 4
OPERATION 1) Power On/Off Button Press the Power Button to turn ON or OFF the unit. Note: Radio can also be powered on by pressing any front button. 2) Volume/Select Knob Rotate the knob left or right to change the volume level. Press the knob to select one of the following functions: VOL---BASS---TREB---BAL Upon choosing the function, rotate the knob to adjust the desired setting.
PAGE 5
3. If additional support is needed, add the included support bracket, and secure it to the vehicle. Secure the opposite end to the radio’s rear chassis using one of the 5mm screws provided. 8) Mode Button Press this button to navigate between modes AUX —TUNER. 9) Scan Button Press this button to automatically preview radios station for 5 seconds. 10) Auxiliary Input Jack The unit is equipped with a front panel 3.
PAGE 6
TROUBLE SHOOTING GUIDE Problem Radio will not power up Cause Solution No power to yellow BATTERY Check for both ACC & wire or blown 5A main fuse. BATTERY voltage with Multi-meter, check all fuses. No sound Speakers not connected; speakers Connect speakers to harness; connected with bad splices; check all spliced wires; verify Speakers shorted to ground; speakers not shorted to chassis; speaker load is not within 4-8 Ω. verify total speaker impedance.