Owners/Users Manual

LOW CUT:
The Low Cut filter is a cut-only filter that allows you to remove unwanted
subsonic frequencies from your music. It can also be used to offset or tame a
large boost on the low shelf band. The numbered settings are in Hz. When set
to “OFF” there is no filtering taking place.
LOW BAND:
There are six available knee frequencies for the low baxandall shelf that can be
seen in the picture above. The numbered settings are in Hz. Use the toggle
switch to select which frequency you’d like to set as the knee for your low shelf.
The frequency is selected when the toggle points to the number, and is
deselected when the toggle points away from the number.
MID BAND:
The mid frequency band is a broad Q sweepable parametric filter, capable of
sweeping from 150Hz to 7kHz.
HIGH BAND:
The high band, similar to the low band is a baxandall shelf with 6 individually
selectable knee frequencies that are engaged when the toggle points to the
number, and disengaged when the toggle points away from the number.