Instructions / Assembly

Any problems or questions call Regency Ofce Furniture at 1-866-816-9822

IMPORTANT NOTICE:

● Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.

● Check to be sure that you have all parts and hardware.

● Remove all wrapping materials, including staples & packing straps before you start to assemble.

● Do not tighten all screws/bolts until completely assembled.

● Keep all hardware parts out of reach of children.

Organize your parts and

hardware.

Wooden components should include:

A) 1 Top B) 4 Legs

C) 1 Square Support D) 1 Cylinder

Hardware includes:

E) 4 Small Bolts F) 4 Large Bolts

G) 2 Allen Wrenches

TVCTR42-TVCTR48 - INSTRUCTIONS

Step 1: Slide leg(B) into metal grooves located on

the cylinder(D). Repeat for remaining 3 legs.

Step 2: Align square support(C) holes with

holes drilled in top of cylinder(D). Insert 4

small bolts(E) into holes and tighten using

allen wrench(G).

E F G

C D

Fig. 1

Step 3: Flip over and align holes in square support

(F) into holes on (C) and tighten using allen wrench

(G).

Fig. 2

Fig. 3

Step 4: Place table upright.

PAGE 1
TVCTR42-TVCTR48 - INSTRUCTIONS Organize your parts and hardware. A C B D Wooden components should include: A) 1 Top B) 4 Legs C) 1 Square Support D) 1 Cylinder Hardware includes: E) 4 Small Bolts F) 4 Large Bolts G) 2 Allen Wrenches E Step 1: Slide leg(B) into metal grooves located on the cylinder(D). Repeat for remaining 3 legs. Fig. 1 B F G Step 2: Align square support(C) holes with holes drilled in top of cylinder(D). Insert 4 small bolts(E) into holes and tighten using allen wrench(G). Fig.