Installation manual

30
Regency Gemfi re™ Gas Fireplace
INSTALLATION
CONVERSION KIT # 476-967 FROM NG TO LPG
CONVERSION KIT #476-968 FROM NG TO ULPG
FOR GEM54™ USING SIT 820 NOVA GAS VALVE
Each Kit contains one LPG
Conversion Kit # 476-968
LPG Conversion Kit Contains:
Qty. Part # Description
1 904-645 Burner Orifi ce #51
1 918-590 Decal "Converted to
LPG"
1 908-528 Red "LPG" label
1 904-529 5/32" Allen Key
1 910-037 LPG Injector
(Pilot Orifi ce)
1 918-798 Instruction Sheet
THIS CONVERSION MUST BE DONE BY A QUALIFIED GAS FITTER
IF IN DOUBT DO NOT DO THIS CONVERSION !!
Each Kit contains one ULPG
Conversion Kit # 476-967
ULPG Conversion Kit Contains:
Qty. Part # Description
1 904-390 Burner Orifi ce #52
1 918-272 Decal "Converted to
ULPG"
1 918-273 Red "ULPG" label
1 904-529 5/32" Allen Key
1 910-037 LPG Injector
(Pilot Orifi ce)
1 918-798 Instruction Sheet
1
) Warning:
Turn off the unit by way of the wall switch or remote.
Allow unit to cool at least 10 min. - prior to removing the faceplate.
2) Shut off the gas supply to the unit.
3) Remove the faceplate by lifting it up off the hinges on the sides of
the fi rebox.
4) Remove the door frame overlay by swinging out 45
o
from the
bottom and lift up and out.
5) Remove the glass door by removing 3 screws and then swinging
the door out 45
o
from the bottom and lift up and out.
6) Remove the following, if installed:
a) Colbalt Glass Crystals
b) Optional Ceramic Stones
c) Pebbles
d) Stainless Steel Panels (see instructions in manual)
Glass door screws