Instructions / Assembly
Any problems or questions call Regency Ofce Furniture at 1-866-816-9822
IMPORTANT NOTICE:
● Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
● Check to be sure that you have all parts and hardware.
● Remove all wrapping materials, including staples & packing straps before you start to assemble.
● Do not tighten all screws/bolts until completely assembled.
● Keep all hardware parts out of reach of children.
You will need 2 person(s) for this assembly. You will need a Phillips head screw driver.
Stand Up Desk LSUD4136 • INSTRUCTIONS
Parts: D: Top Support(2) • E: Sides(2) • F: Back
A
B
C
Hardware :
A: Cam Pin(10) • B: Cam Cap(10) • C: Wood Screw(4)
D E F
STEP 1 : Screw in 5 Cam Pins(A) into each Side(E).
E E
A
A
A
AA A
A
A
A
A
STEP 2 : Attach Top Supports(D) and Back(F) to the
Left Side(E). (See Figure 1)
E
FD D
Figure 1: To open Cam, point
arrow toward Cam Pin hole.
To lock Cam, turn clockwise.
STEP 3 : Attach Right Side(F) by tightening Cam
Locks. (See Figure 1)
STEP 13 : Place all Cam Caps(B) in place. You are
now ready to connect the single/multiple unit top.
(To connect top see top instructions also enclosed.)