Instructions / Assembly
Any problems or questions call Regency Ofce Furniture at 1-866-816-9822
IMPORTANT NOTICE:
● Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
● Check to be sure that you have all parts and hardware.
● Remove all wrapping materials, including staples & packing straps before you start to assemble.
● Do not tighten all screws/bolts until completely assembled.
● Keep all hardware parts out of reach of children.
LBC4732 (L4732BC), VBC4732 (V4732BC) - INSTRUCTIONS
Step 1: Thread Cam Locks (B)
into small holes in Bookcase Sides,
Back
pieces,
and Top.
Step 2: Check
Cams to
make sure
that the arrow
is pointing
toward the
hole in the side
as shown.
Step 5: Attach
Top and Bottom
Shelves (H, O)
to Back Pieces
(J, K); turn
cams
clockwise to
secure.
Step 6: Attach Sides (I, L) to Top,
Bottom, and Back Pieces; turn cams
clockwise
to secure.
Step 8: Thread Locking Support
Pins (F) into place. Place Center
Shelf (N) onto supports; turn lock
with screwdriver to secure.
Step 7: Place
Caps (G) over
visible Cams.
Step 3: Attach Back Pieces (J, K)
together with the Double Cam Lock
(A). Secure
pieces
together
by turning
cams
clockwise as
shown.
A
Organize your parts and hardware. Hardware should include:
A) 1 Double Cam Lock
B) 14 Cam Locks
C) 1 L-Bracket D) 6 Screws
E) 8 Shelf Support Pins
F) 4 Locking Shelf Support
Pins (4 Locks should already
be in Center Shelf)
G) 10 Caps
NOTE: 16 Cams (shown in
Step 2) should already be
placed in wooden parts.
Wooden Components include:
H) 1 Top Shelf I) 1 Left Side J) 1 Left Back K) 1 Right Back L) 1 Right Side
M) 2 Adjustable Shelves N) 1 Locking Center Shelf O) 1 Bottom Shelf P) 1 Bottom Support
NOTE: When identifying components, remember that the bottom edge of the Side and Back Pieces is black.
Tools Required: Phillips Screwdriver
B
C
D
H
E
F
G
JI K L
M
N
O
P
M
Step 4: Attach Bottom Support (P)
to Bottom Shelf (O); insert dowel
rods on the Support into holes on the
bottom of Shelf. Attach L-Bracket
(C) with Screws (D) as shown.
Step 9: Using Shelf Support Pins
(E), position adjustable shelves (M)
as desired.