Installation Guide

ManualsBrandsRegency ManualsFile CabinetsMagons Cherry Lateral File with Open Hutch

Any problems or questions call Regency Ofce Furniture at 1-866-816-9822

IMPORTANT NOTICE:

● Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.

● Check to be sure that you have all parts and hardware.

● Remove all wrapping materials, including staples & packing straps before you start to assemble.

● Do not tighten all screws/bolts until completely assembled.

● Keep all hardware parts out of reach of children.

Organize your parts and

hardware.

Wooden componenets should include:

A) Lower Shelf B) Middle Shelf

C) Top D1) Left Side D2) Right Side

E) Back

Hardware includes:

F) 8 Cam Pins

G) 8 Hole Covers

H) 4 Shelf Pins

I) 4 Locking Shelf Pins

LHO35-VHO35-SHO30 - INSTRUCTIONS

Step 1a: Insert

4 cam pins (F)

into holes lo-

cated at the four

corners of top

(C).

F G

Step 2a: Attach back (E) to top

cam pins into cam locks and

tightening (Figure 1).

Step 4: Place lower shelf (A)

above locking shelf pins (I) until

locking pins t into locks. Tighten

locks with phillips head

screwdriver.

Lock

Use phillips head

screwdriver to tighten

Step 1b:

Insert 2 cam

pins into each

side(D1,D2).

Attach to Top

by inserting

Cam pins into

cam locks. Lock

Cams (Figure 1)

Note: Be sure

shelf pin holes

are facing in.

Other required hardware or tools not included: phillips head screwdriver

Step 2b: Next, attach

right side (D2) by inserting

cam pins (F) into holes on

back (E) and top (C) and

tighten cams (Figure 1).

Step 3: Insert 4 locking shelf pins (I) into the lower

predrilled holes.

D1 D2

Figure 1: To open Cam,

point arrow toward Cam

Pin hole. To lock Cam,

turn clockwise.

Summary of content (2 pages)

PAGE 1
LHO35-VHO35-SHO30 - INSTRUCTIONS Organize your parts and hardware. Other required hardware or tools not included: phillips head screwdriver Wooden componenets should include: A) Lower Shelf B) Middle Shelf C) Top D1) Left Side D2) Right Side E) Back B A D1 C D2 I Hardware includes: F) 8 Cam Pins G) 8 Hole Covers H) 4 Shelf Pins I) 4 Locking Shelf Pins F Step 2a: Attach back (E) to top (C) and side (D1) by inserting cam pins into cam locks and tightening (Figure 1).
PAGE 2
LHO35-VHO35 - INSTRUCTIONS Step 5: Insert four shelf pins (H) into predrilled holes and place middle shelf (B) above pins until it is sitting securely. H C Step 6: Place 8 hole covers (G) over cam lock holes. Insert four shelf pins into predrilled holes. H B G IMPORTANT NOTICE: ● Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched. ● Check to be sure that you have all parts and hardware.