Installation manual

Regency B36XTCE Gas Fireplace
13
INSTALLATION
FRAMING
Q
P
U
V
T
Opening for gas
connection
11" (279mm)
dia. Hole through
wall Vent.
Non-Combustible
Header
(steel stud) on edge
Drywall
(or other
facing)
W
Non-Combustible Facing
S
S
R
Non-combustible
Header
(steel stud
on edge)
M
N
L
O
Framing Dimensions Description B36XTCE
L Framing rise from fl oor
0" (when not using a surround)
1" min (when using Mantel)
M Framing Width 41-1/4"(1048mm)
N Framing Height 42" (1067mm)
O (Rear Vent) Framing Depth - Rear Vent 23-7/8" (606mm)
O (Top Vent) Framing Depth - Top Vent 23-7/8" (606mm)
P (Top Vent) Corner Facing Wall Width 53-1/4" (1353mm)
P (Rear Vent) Corner Facing Wall Width 57-7/8" (1470mm) AstroCapXL
66-1/8" (1670mm) - other approved caps
Q (Top Vent) Corner Facing Wall Width 75-1/4" (1911mm)
Q (Rear Vent) Corner Facing Wall Width 81-1/2" (2070mm) AstroCapXL
93-1/2" (2375mm) - other approved caps
R (Rear Vent) Framed Chase Ceiling - Rear 41-1/2" (1054mm)
R (Top Vent) Framed Chase Ceiling - Top 50-1/2" (1283mm)
S (Rear Vent) Vent Centerline Height - Rear 26-1/2" (673mm)
S (Top Vent) (5" x 8") Vent Centerline Height - Top 42-1/8" (1070mm) Flex 44-1/4" (1123mm) Rigid
S (Top Vent) (4" x 6-5/8") Vent Centerline Height - Top - 49" (1245mm) Rigid
T Gas Connection Height 1-1/2" (38mm)
U Gas Connection Inset 7-3/8" (187mm)
V Gas Connection Width 3-1/4" (82mm)
W Non-combustible Height 3-1/2"" (89mm)
** Important: Framing height requires consideration of the hearth depth. Dimension N = N + the thickness of the installed hearth.