Owner`s manual

INSTALLING THE REMOVABLE SWITCH HOUSING

NOTE: Be sure the power is off before installing.

1. Loosen the 3 side screws on detachable mounting plate halfway.

2. If installing light kit, carefully remove light kit cover in bottom of switch housing. Attach the light kit to the switch

housing per instructions supplied with light kit. (Follow the instructions included with the kit.)

3. Connect the plug and receptacle and make sure side buckle snaps in place.

4. Attach the switch housing to the mounting plate.

5. Align the side screws with keyhole slots on edge of switch housing and tighten the side screws.

6. Turn the power on. Your Regency Ceiling Fan is now ready to enjoy!

Light Wires

Switch Housing

Keyhole Slot (x3)

Optional Light Kit

connects to bottom

of Switch Housing

Side Screw (x3)

Detachable Switch Housing

Mounting Hub