Owner`s manual

INSTALLING THE UPPER LIGHT PLATE

1. Install the 6 (15w E12) light bulbs. (Fig. 1)

2. Loosen the 2 screws and remove 1 screw that is installed on

the top of the motor assembly.

3. Position the mood glow light assembly on the top of the

assembly and make sure the side with the sockets is facing

downward.

4. Connect the light wire from the mood glow light assembly to the

light wire form the motor assembly. (Fig. 2)

5. Secure the mood glow light assembly to the top of the motor

assembly with the three screws provided.

Note: The light wire must be placed behind the sockets. (Fig. 3)

INSTALLING THE MOOD GLOW LIGHT ASSEMBLY:

Fig. 1

Fig. 2

Fig. 3

assembly

mood glow light assembly