Owner`s manual

1. Unpack your fan and check the contents. Do not discard the carton. If warranty replacement or repair is ever necessary,

the fan should be returned in original packing. Remove all parts and hardware. Do not lay motor housing on its side,

or the decorative housing may shift, be bent or damaged.

2. Examine all parts. You should have the following:

UNPACKING YOUR FAN

1. Hanging bracket

Ceiling canopy

3. Downrod/ball assembly

Bracket for decorative wir

e suppor

5. Decorative wire supports with threaded loops (3)

6. Decorative collar cover

Motor assembly (all parts come seperate in box):

A. Glass support frame

B. Motor housing glass shade

C. Blade ar

D. Switch housing cover

8. Fan blades (5)

Switch housing

10. Switch housing accent cover plate

11.

Bracket har

dwar

e (wood scr

ews, washers, wir

e nuts)

12. Blade to blade arm screws (20) with Allen wrench

13. Downrod pin and cotter pin

14.

Light bulbs (25w) (4)

15. Glass retainer bracket

16. Transmitter and receiver with holster

NOTE: Design of parts shown above may look slightly

different for your specific model of fan.