Owner`s manual

OPERATING BUTTONS ON THE TRANSMITTER

HI – fan high speed

MED – fan medium speed

LOW – fan low speed

FAN/OFF – fan speed off

LIGHT – light brightness and off function for uplight

FOR/REV – forward and reverse

• The light functions are controlled by pressing the light button. Tap button quickly to turn light off or on. Push the button

once and release to turn the light on to full brightness. Hold the button down to increase or decrease light brightness.

Release the button at the desir

ed light brightness and that setting will be remembered the next time the light is turned on.

The pre-set brightness can be changed by holding down the light button again until the new desired brightness is reached.

NOTE: If power is lost to the fan receiver, the memory will be lost and all settings will return to the default.

• Keep pressing the button for more than one second to dim the light and vary it cyclically from dim to bright and back again.

• Range of the transmitter is approximately 25 ft.

• Forward/Reverse Direction:

Forward is a counterclockwise rotation of the blades when viewed from beneath the fan. This will create a downward breeze

that can be felt below the fan. This is the normal direction for the fan to run when the weather is warm.

Reverse (clockwise) will draw air up through the blades and towards the ceiling, down the walls, and into the living space

during the cooler months.

IMPORTANT: To prevent damage or cause injury, be sure that fan is switched to off and blades have stopped

moving completely before attempting to change direction of rotation.

OPERATION

WARM MONTHS

Forward (counterclockwise)

COOL MONTHS

Reverse (clockwise)