Owner`s manual

Be sure electricity is turned off at the main power box before wiring.*
Three wires are connected to the fan (plus the ground wire).
Black - the “hot” power to run fan.
White - the “common” power to run fan and light,
also referred to as “AC neutral”.
Blue - the “hot” power for upper light.
Green - ground wire.
Five wires are connected to the remote control receiver.
Three will connect to the three wires coming out of the fan
(matching color to color) and the remaining black wire and
white wire will connect to the building AC circuit.
BE SURE ELECTRICITY IS TURNED OFF AT THE
MAIN POWER BOX BEFORE WIRING.
Connect five power wires as shown [Fig. 1], using wire nuts
pr
ovided. Connect gr
een ground wire to building ground
wire circuit. Extend antenna wire inside canopy, but do not
attach to any other wire.
NOTE: If power to the fan’
s electrical ceiling box is controlled by a wall switch, the wall switch must remain ON
for the radio remote control to operate. Turning the wall switch OFF will turn off all fan/light functions and resets
the receiver back to default mode. The wall switch will need to be turned back ON to allow use of remote control.
* Restore power by replacing fuse or resetting circuit breaker ONLY AFTER ALL INSTALLATION AND ELECTRICAL
WORK IS COMPLETED AND DOUBLE-CHECKED.
8
ELECTRICAL CONNECTIONS
*
Receiver
Antenna
B
L
U
E
B
L
U
E
W
H
I
T
E
W
H
I
T
E
B
L
A
C
K
B
L
A
C
K
G
R
E
E
N
G
R
O
U
N
D
B
L
A
C
K
H
O
T
C
A
R
R
I
E
R
(
B
L
A
C
K
)
W
H
I
T
E
C
O
M
M
O
N
(
W
HIT
E
)
Fig. 1