Owner`s manual

PREPARATION:

Verify that you have all parts before beginning the installation. Check foam insert closely for missing parts. Remove motor from

packing. To avoid damage to finish, assemble motor on soft padded surface or use the original foam inset in motor box. Do not

lay fan on its side as this could r

esult in shifting of motor in decorative enclosure.

Caution: To avoid possible electrical shock, be sure elec-

tricity is turned off at the main power box before wiring. All

wiring must be in accor

dance with National and Local

Electrical Codes and the ceiling fan must be grounded as a

ecaution against possible electric shock.

1. Locate ceiling area where fan is to be mounted, being sure

location agrees with the requirements in the minimum

clearance section of this guide. Mounting ar

ea must be

sound and of adequate size to support 35 lbs. (p. 1, #3

and #4)

If not alr

eady pr

esent, mount a UL listed outlet box

marked “suitable for fan support” following the instruc-

tions pr

ovided with the outlet box. The outlet box must

be able to support a minimum of 35 pounds.

Note: Do Not Use Standar

d Electrical Box

3. Attach hanger bracket to outlet box using scr

ews pr

vided with the outlet box.

PREPARATION

Ceiling Fan 

Outlet Box

Hanger

Bracket

Outlet Box

Screw

Flat Washer

Spring Washer

Parts identification on assembled fan

INSTALLING THE MOUNTING BRACKET

Downrod

Canopy

Fan Housing

Blade

Blade Arm

Glass Shade