Specifications

RM2151 - GENERAL INFORMATION Page 1-3
Paper loading
Load the paper into the printer as described below. If you use fan-fold paper, please refer to the printer
manufacturer’s handbook for paper loading instructions.
1. Place a roll of paper on the paper-shaft.
2. Remove the access cover and lift the co
lumn indicator bar.
3. Pull the paper down into the paper guides
and slide it under the platen.
4. Keep the paper release lever closed.
5. Turn the platen knob to pull the paper
around the platen.
6. Lower the column indicator bar.
7. Replace the access cover.
Ribbon installation
Load/replace the ribbon as described below.
1. Remove the access cover.
2. Slide the print head to the middle of the
printer.
3. To remove the old ribbon cartridge, grasp
the cartridge on both sides of the print head
and lift it up.
4. Place the ribbon cartridge on the ribbon
cartridge holder and press firmly on the
cartridge, until you feel it snaps into place.
5. Replace the access cover.