Specifications

RM2151 - FUNCTION COMMANDS Page 8-1
8 FUNCTION COMMANDS.APPENDIX 1
The following commands may be used in the radiotelex service.
AMV+ Message to AMVER.
Automatically connects to AMVER, New York. The Danish Ministry of Industries pays for the
call.
BRK+ Terminates the radiotelex connection.
DIRTLXxy+ For direct telex connection to a subscriber. x = country code for countries which is not the same
as the country of the called coast station, y = subscriber’s telex number. For example
DIRTLX05612345+ ( Norway 12345 ).
INF+ The coast station transmits a menu of special services available to ships.
MAN+ Service printer in radiotelex department. Answerback is 77170 rtxman dk for the danish coast
station Lyngby. The service can be used for ship-ship messages and for telex to countries
which cannot be dialled directly. No charge is made until the message is forwarded.
MED+ Radiomedical. (Teleprinter department).
OBS+ Meteorological telegram. Connects automatically to a meteorological service which pays for
the call. In Denmark the answerback is 27075 ekch dk.
OPR+ For requesting operator assistance. No charge is made.
POS+ Position message. Routed to OPR.
RTL+ Radiotelex letter. In Denmark the answerback is 00190 tlg dk.
STA+ Status requested on a STORE and FORWARD message. If the telex message has been
delivered, the equipment will send the reference number, time of delivery and the land
subscriber’s answerback. If the message has not been delivered, only the reference number
will be send.
TGM+ Radiotelegram.
TLXxy+ For STORE and FORWARD telex messages to a subscriber. x = country code for countries
which is not the same as the country of the called coast station country, y = subscriber’s telex
number. For example TLX05612345+ ( Norway 12345 ).
The system responds with MSG+? and your message to the subscriber in question
can be send. Terminate by sending the group KKKK, and you will receive reference number
and duration. This command may also be used for multi-addressing. The same message can
be sent to a maximum of 5 subscribers by writing the telex numbers separated by a comma,
for example: TLX12345,05112345,04456789,98765+. Note: The command is one group
without spaces.