Specifications
Page 3-24 RM2151 - USING THE RADIOTELEX SYSTEM
Watchkeeping Table
Enables you to Insert, Delete or view the stations to be watched. Below is shown an example:
Editor 11 13
File Edit Search Options Applications Quit
To: S.P.Radio
From: s/s Sailor 07 Watchkeeping Table
Re:
Date: Insert Delete Frequencies
Mail Direct Lyngby
This Station
Regards Maritex-Sweden-A
Maritex-Sweden-B le...
The Operator Maritex-Sweden-C ncies
Maritex-Panama ncies
Maritex-Philippines
Maritex-Norway ^Y
--------- --------- ------ -------- --------
Telex: TEST.TLX 171 Chars Line 1 Col 1 Inserting
Insert: Insert a station into the Watchkeeping Table.
Delete: Delete an entry (station) from the Watchkeeping Table.
Frequencies: A view of all frequencies to be watched for a station in the Watchkeeping Table. (This includes
frequencies selected via MUF calculation).
ARQ frequencies, Lyngby
File Edit Search Options App
Edit Insert Delete
ARQ: Connected to 21
Watchke Muf Mask Channel Rx. freq. Tx. freq.
07700 1613.0 2148.0
+? Insert Del 4211.0 4173.0
29.02 4215.5 4178.0
16840 Mail Direct Lyngby 6318.5 6267.0
6321.0 6270.0
+ 8421.0 8381.0
* 8427.0 8387.0
* 12584.0 12481.5
* 12592.0 12489.5
--------- --------- ------ -------- --------
Telex: 290292 83 Chars Line 1 Col 1 Inserting
In the illustration above there might be one of two signs in the Mask-column. The signs can be either a ‘+’ or a ‘-’.
Or there could be no sign at all. If the sign is a ‘+’ the frequency pair or channel will always be included in the frequency
scan table. If the sign is a ‘-’ the frequency will not be included in the frequency scan table. No sign at all means that
the frequency can be included in the scan table.
The sign ‘-’ also means that the MUF programme can not choose this frequency.
An asteric in the MUF column means that the frequency is chosen by the MUF programme and will be included in
the frequency scan.
Watch ARQ frequencies A change is made by hitting the ENTER key. The symbol>> indicates that watch on
ARQ frequencies is “on”.
Watch DSC frequencies A change is made by hitting the ENTER key. The symbol>> indicates that watch on
DSC frequencies is “on”.
Note: It is not possible to watch ARQ frequencies and DSC frequencies at the same time.