Specifications

RM2151 - USING THE RADIOTELEX SYSTEM Page 3-23
Rtx auto popup.
The Rtx auto popup is an option, which automatically will activate the directcall window, when an ARQ call or a FEC
call is received.
The option is activated by entering the menus:
F3 The radiotelex menu is selected.
OPTIONS The radiotelex Options menu is selected.
Editor 11 16
File Edit Search Options Applications Quit
To: S.P.Radio
From: s/s Sailor 07710
Re:
Date: Radiotelex
Mail DirectCall Stations Watchkeeping Options
This
¤Rtx auto popup
Regards
Printer...
The Operator
Terminal mode...
--------- --------- --------- --------- --------- --------- -------- --------
Telex: TEST.TLX 171 Chars Line 1 Col 1 Inserting
The symbol >> indicate that auto popup is on. The Enter key switch the option on/off when the option is high-lighted.
Watchkeeping.
The radiotelex modem can be set to listen on a single frequency as explained in the chapter Frequency set up.
A better utilization of the radiotelex modem can be obtained if you set the modem to scan more frequencies, this
is done in the radiotelex watchkeeping menu as explained below.
Stations can be inserted and deleted from the watchkeeping table. Furthermore the watchkeeping can be stopped
and started. It is selectable whether the ARQ frequencies or the DSC frequencies should be watched. Enter the
menus:
F3 The Radiotelex menu is selected.
WATCHKEEPING The Radiotelex watchkeeping menu is selected.
Editor 11 11
File Edit Search Options Applications Quit
To: S.P.Radio
From: s/s Sailor 07710
Re:
Date: Radiotelex
Mail DirectCall Stations Watchkeeping Options
This
Watchkeeping
Regards
Watchkeeping Table...
The Operator ¤Watch ARQ frequencies
Watch DSC frequencies
--------- --------- --------- --------- --------- --------- -------- --------
Telex: TEST.TLX 171 Chars Line 1 Col 1 Inserting