Specifications

Page 3-20 RM2151 - USING THE RADIOTELEX SYSTEM

A call could develop as illustrated below.

Ð Ð

Editor 14:36

Ð Ð

DirectCall LOCK CONNECT SEND REPEAT

Call Commands Over End Frequency

Call in progress 14:35

ARQ: Connected to 219000015+ You are connected to the called stn..

07700 SAILOR X You ask "who are you".

07700 sailor x You send "this is".

to: s.p.radio You start to send your message.

from: s/s sailor 07710

re: test of radiotelex system

date: 09:21 1992-06-02

this is a test of my new hf ssb radiotelex system.

regards

the operator End of your message.

07700 SAILOR X You ask "who are you".

07700 sailor x You send "this is".

Clear in progress You break the connection by "end".

Standby

Status: ARQ master on-line Rx: 4211.0 Tx: 4173.0

When connected to the called station it is possible to have a direct dialogue. Use the ‘Over command’ from the

command line to change the direction of information.

Activating a FEC call.

Two types of FEC calls can be made, a collective or a selective call. Common to both calls are that dialogue is not

possible and the call is transmitted in broadcast mode, meaning that you get no automatically answer back from the

called station.

A FEC call is activated by entering the menus:

F3 The radiotelex menu is selected.

DIRECTCALL The directcall menu is selected.

FEC The directcall FEC collective/selective menu is selected.

Ð Ð

Editor 12:59

Ð Ð

DirectCall LOCK CONNECT SEND REPEAT

Call Commands Over End Frequency

CALL..

ARQ... ^PSelcall or station name: 219000015

FEC (C

FEC (S Tx. frequency: 4204

Approve ? YES

Clear in Alt+F1 to show list

Standby

Status: Scanning DSC Rx: Tx: