Specifications

Page 3-16 RM2151 - USING THE RADIOTELEX SYSTEM
Frequency set up.
The radiotelex modem is normally scanning ARQ or DSC frequencies. If you want the radiotelex modem to listen on
a certain RX frequency enter menu
F3 The radiotelex menu is selected.
DIRECTCALL The directcall menu is selected.
FREQUENCY The directcall frequency set up menu is selected.
You will now see this display:
Ð Ð
Editor 12:20
Ð Ð
DirectCall LOCK CONNECT SEND REPEAT
Ã
Â
Call Commands Over End Frequency
Ã
Â
^PRx. frequency: 4204
Tx. frequency: 4204
Alt+F1
Ã
Â
Status: Scanning ARQ Rx: 4204.0 Tx: 4204.0
Key in the RX frequency you want the radiotelex modem to listen on and press ENTER. The modem will now update
the status line with the just keyed in RX frequency, indicating that the modem is now listening on this frequency.
To reactivate the DSC or ARQ scan you must leave the directcall menu by use of the Esc key. The modem then
automatically starts the scanning.