ELEX MK4 INTEGRATED AMPLIFIER
02 YOUR USER MANUAL Please be sure to carefully read this manual before using the product. This ensures that you are getting the most out of your product. Please scan the QR Code to access the multilingual user manual via the product web page. For user instructions in your language, please visit www.rega.co.uk and go to the download section of your chosen product page. Pour obtenir les instructions aux utilisateurs dans votre langue, veuillez visiter www.rega.co.
03 Dansk Mantenimiento Limpiar solamente con un paño de microfibra con la unidad desconectada de la red. No retire ninguna cubierta, no hay piezas que requieran mantenimiento por parte del usuario en el interior. Si la unidad tiene un rendimiento errático o emite humos u olores, desconéctela de la fuente de alimentación y llévela a un servicio técnico cualificado. Service Rengør kun pladespilleren med en mikrofiberklud med strømforsyningen frakoblet. Fjern ingen af beklædningerne.
04 COMPLIANCE INFORMATION English This symbol indicates that the electronic equipment bearing it should not be disposed of as general household waste at the end of its life. The equipment should be disposed of at a collection point for waste electrical and electronic equipment in accordance with national legislation and Directive 2012/19/EU. For more information about how to dispose of your waste electronic equipment, please contact your local authority or retailer where you purchased the product.
05 INTRODUCTION Thank you for purchasing the Rega Elex MK4. The Elex MK4 is a stereo integrated amplifier designed to deliver the purest musical performance. Housed in a brand new custom designed case to match the rest of the Rega range, the new MK4 builds on previous Rega designs by using our multi-award-winning Class A/B power amplifier circuit to deliver a powerful 72W per channel into 8Ω loads.
06 CONNECTIVITY REAR PANEL CONNECTIVITY 1. Phono Input 1 - Enables connection of a turntable with a moving magnet cartridge. Loading will be suitable for most MM cartridge designs on the market, and a dedicated grounding point is provided directly below the input sockets for tonearms with a separate ground wire (not required for Rega tonearms). 2.
07 CONTROLS FRONT PANEL CONTROLS Off ELEX MK4 9. On/Off Switch - The power switch to the left of the control panel turns the amplifier on and off. The Elex MK4 is on when the switch is depressed and off when it is out. The Rega logo will illuminate red when the switch is on and the product is supplied with power, indicating that the power supply is operational. Please refer to the diagram below.
08 REMOTE MINI REMOTE CONTROL The mini remote (supplied) is a system remote handset. It allows you to operate all the various remote controllable functions of this and many other Rega products. (Batteries included: 2 x AAA Alkaline) Not used. Select Digital using Amp Input.
09 OPERATION/PROTECTION THERMAL CUT-OUT OPERATING TEMPERATURE ELEX MK4 If the amplifier reaches a temperature liable to cause internal electronic damage, a thermal protection sensor will shut the unit off or disable speaker output. The unit should be turned off for at least 10 minutes to allow for cooling. After this period, the amplifier should automatically reset and continue to work normally.
SPECIFICATIONS AMPLIFIER OUTPUT Power Amplifier Output (at rated 230/115V supply voltage) 72W per channel into 8Ω 90W per channel into 6Ω Note: Continued high level use into loads of 6Ω or less may cause the case to exceed 40°C above ambient temperature and activate the thermal shut down. Headphone Output No Load 11.3V 300Ω 8.1V 54Ω 3.6V 32Ω 2.4V Source Impedance 109Ω DISTORTION THD+Noise (at 1dB below clip into 8Ω measurement bandwidth 22Hz to 22kHz) A-weighted Line Inputs Typically 0.
ELEX MK4 EN
Rega Research Ltd. 6 Coopers Way Temple Farm Industrial Estate Southend-on-Sea SS2 5TE www.rega.co.