User Manual

CREATING A PROGRAM
The program function allows you to program up to 99 tracks from a disc or album in
any order you specify.
1) Press ‘Program’ on the remote handset to create your new programme list.
”PROGRAM” will appear on the display.
2) When the first program location appears you can enter the required track number,
continue this until your programme is complete up to a maximum of 99 locations.
3) Use the Track next and Track previous buttons to enter the track numbers, Press
the ‘OK’ button twice after each track is selected.
4) If you enter the wrong track number it can be deleted by pressing the clear button.
This will clear the last location entered.
5) Press ‘Program’ again to finish programming.
15
Memory location number
Track number programmed