User Manual

English 59
Maintenance
4. Turn the cartridge knob clockwise to
lock into place.
5. Press and hold Crushed Ice on the
feature panel for 3 seconds to reset the
life cycle detector.
The lter indicator ( ) turns off.
6. When you are done replacing the lter,
open the water valve and run water
through the dispenser for about 7
minutes. This is to remove impurities
and air from the water line.
NOTE
• A newly installed lter may cause the water dispenser to spurt water briey. This is
because air has entered the waterline.
• The replacement process may cause the water dispenser to drip for a short period of
time. If it drips, simply wipe up any water on the oor with a dry towel.
Untitled-3 59 2018-07-05  5:55:10