SDS
Table Of Contents
- - SECTION 1: Identification
- - SECTION 2: Hazard(s) identification
- - SECTION 3: Composition/information on ingredients
- - SECTION 4: First-aid measures
- - SECTION 5: Fire-fighting measures
- - SECTION 6: Accidental release measures
- - SECTION 7: Handling and storage
- - SECTION 8: Exposure controls/personal protection
- - SECTION 9: Physical and chemical properties
- 9.1 Information on basic physical and chemical properties
- pH (value)
- Melting point/freezing point
- Initial boiling point and boiling range
- Flash point
- Evaporation rate
- Flammability (solid, gas)
- Explosion limits of dust clouds
- Vapor pressure
- Density
- Vapor density
- Relative density
- Solubility(ies)
- Partition coefficient
- Auto-ignition temperature
- Viscosity
- Explosive properties
- Oxidizing properties
- 9.1 Information on basic physical and chemical properties
- - SECTION 10: Stability and reactivity
- - SECTION 11: Toxicological information
- - SECTION 12: Ecological information
- - SECTION 13: Disposal considerations
- - SECTION 14: Transport information
- - SECTION 15: Regulatory information
- 15.1 Safety, health and environmental regulations specific for the product in question
- National regulations (United States)
- Industry or sector specific available guidance(s)
- 15.2 Chemical Safety Assessment
- 15.1 Safety, health and environmental regulations specific for the product in question
- - SECTION 16: Other information, including date of preparation or last revision

Concerning incompatibility: see below "Conditions to avoid" and "Incompatible materials".
The material is stable under normal ambient and anticipated storage and handling conditions of temperature and pres-
sure.
No known hazardous reactions.
There are no specific conditions known which have to be avoided.
The product in the delivered form is not dust explosion capable; the enrichment of fine dust however leads to the danger
of dust explosion.
Oxidizers
Reasonably anticipated hazardous decomposition products produced as a result of use, storage, spill and heating are not
known. Hazardous combustion products: see section 5.
Test data are not available for the complete mixture.
The method for classification of the mixture is based on ingredients of the mixture (additivity formula).
This mixture does not meet the criteria for classification.
Shall not be classified as acutely toxic.
Shall not be classified as corrosive/irritant to skin.
Shall not be classified as seriously damaging to the eye or eye irritant.
Shall not be classified as a respiratory or skin sensitizer.
Shall not be classified as germ cell mutagenic.
SECTION 10: Stability and reactivity
10.1 Reactivity
10.2 Chemical stability
10.3 Possibility of hazardous reactions
10.4 Conditions to avoid
Hints to prevent fire or explosion
10.5 Incompatible materials
10.6 Hazardous decomposition products
SECTION 11: Toxicological information
11.1 Information on toxicological effects
Classification procedure
Classification acc. to OSHA "Hazard Communication Standard" (29 CFR 1910.1200)
Acute toxicity
Skin corrosion/irritation
Serious eye damage/eye irritation
Respiratory or skin sensitization
Germ cell mutagenicity
Safety Data Sheet
acc. to 29 CFR 1910.1200 App D
Refresh Scented Gel - Fresh Linen
Version number: 2.0
Replaces version of: 2015-12-21 (1)
Revision: 2016-04-04
United States: en
HS 176 SDS-02:
Page: 6 / 10