SDS

Use local and general ventilation. Avoidance of ignition sources. Keep away from sources of ignition - No smoking. Take
precautionary measures against static discharge. Use only in well-ventilated areas. Due to danger of explosion, prevent
leakage of vapours into cellars, flues and ditches. Ground/bond container and receiving equipment. Use explosion-proof
electrical/ventilating/lighting equipment. Use only non-sparking tools.
Places which are not ventilated, e.g. unventilated below ground level areas such as trenches, conduits and shafts, are par-
ticularly prone to the presence of flammable substances or mixtures. Vapors are heavier than air, spread along floors and
form explosive mixtures with air. Vapors may form explosive mixtures with air.
Wash hands after use. Do not to eat, drink and smoke in work areas. Remove contaminated clothing and protective
equipment before entering eating areas. Never keep food or drink in the vicinity of chemicals. Never place chemicals in
containers that are normally used for food or drink. Keep away from food, drink and animal feedingstuffs.
Keep container tightly closed and in a well-ventilated place. Use local and general ventilation. Keep cool. Protect from
sunlight.
Keep away from sources of ignition - No smoking. Keep away from heat, hot surfaces, sparks, open flames and other igni-
tion sources. No smoking. Take precautionary measures against static discharge. Protect from sunlight.
Heat, High temperatures
Use local and general ventilation. Ground/bond container and receiving equipment.
Only packagings which are approved (e.g. acc. to ADR) may be used.
See section 16 for a general overview.
SECTION 7: Handling and storage
7.1 Precautions for safe handling
Recommendations
- Measures to prevent fire as well as aerosol and dust generation
- Specific notes/details
Advice on general occupational hygiene
7.2 Conditions for safe storage, including any incompatibilities
Managing of associated risks
- Explosive atmospheres
- Flammability hazards
Control of the effects
Protect against external exposure, such as
- Ventilation requirements
- Packaging compatibilities
7.3 Specific end use(s)
Safety Data Sheet
acc. to 29 CFR 1910.1200 App D
Version number: 1.0 Date of compilation: 2015-12-23
United States: en
HS 334 SDS-04:
Page: 5 / 10