SDS

Other information relating to spills and releases
Place in appropriate containers for disposal. Ventilate affected area.
6.4 Reference to other sections
Hazardous combustion products: see section 5. Personal protective equipment: see section 8. Incompatible materials:
see section 10. Disposal considerations: see section 13.
SECTION 7: Handling and storage
7.1 Precautions for safe handling
Recommendations
- Measures to prevent fire as well as aerosol and dust generation
Use local and general ventilation. Use only in well-ventilated areas. Ground/bond container and receiving equipment.
- Specific notes/details
Dust deposits may accumulate on all deposition surfaces in a technical room. The product in the delivered form is not
dust explosion capable; the enrichment of fine dust however leads to the danger of dust explosion.
Advice on general occupational hygiene
Wash hands after use. Do not eat, drink and smoke in work areas. Remove contaminated clothing and protective equip-
ment before entering eating areas. Never keep food or drink in the vicinity of chemicals. Never place chemicals in con-
tainers that are normally used for food or drink. Keep away from food, drink and animal feedingstuffs.
7.2 Conditions for safe storage, including any incompatibilities
Managing of associated risks
- Explosive atmospheres
Removal of dust deposits.
Control of the effects
Protect against external exposure, such as
Heat, High temperatures, Frost
7.3 Specific end use(s)
See section 16 for a general overview.
SECTION 8: Exposure controls/personal protection
8.1 Control parameters
Occupational exposure limit values (Workplace Exposure Limits)
Coun-
try
Name of sub-
stance
CAS No Notation Identifier TWA
[ppm]
TWA
[mg/m³]
STEL
[ppm]
STEL
[mg/m³]
US isopentyl acetate 123-92-2 PEL 100 525
Notation
STEL short-term exposure limit: a limit value above which exposure should not occur and which is related to a 15-minute period un-
Safety Data Sheet
acc. to 29 CFR 1910.1200 App D
Refresh Gel Jar - Very Cherry
Version number: 1.0 Date of compilation: 2017-10-27
United States: en
HS 1433 SDS-01:
Page: 4 / 11