Instruction Manual

Table Of Contents
90x180mm128G纸三页双
www.mangotek.com
RWC37
Instruction Manual
Mainly for iPhone, Apple Watch, AirPods, USB-C devices and some TWS
3 IN 1
Multi-Function
Wireless Charger Station
1
2
3
4
5
6
7
1. Apple Watch Charger Module Pop up Button
2. Airpods 2 pro Wireless Charging Spot
3. Apple Watch Charge Module
4. LED Indicator
5. iPhone Wireless Charging Spot
6. USB-C Output Port
7. DC Input Port
Note: There are 2 different kinds of surface treatment for this wireless
charger unit, which includes:
Black leather with space gray shell
Black woven finish with black shell

Mangotek Charging station is a 3 in 1 charger solution for your
Apple watch, iPhone 11/ 11 Pro or all the other Qi enabled devices,
it can charge 3 devices simultaneously, support 7.5W fast charge
for iPhone, 10W for Samsung mobile phones, 5W for other Qi
enabled devices without wireless fast charger. There is another
USB-C port which allows you to wired charge your mobile devices
by plugging in a usb c to lightning charging cable or usb c to c
charging cable(cable not included in the package)
The Apple Watch charging station support night stand mode for
your Watch

Firstly, Connect the charger station with power electricity by using
the included DC adaptor, Plug it in a wall outlet or power strip
Secondly, Press the side button, the Apple watch charger module
will pop up, place your Apple Watch onto the top of the integrated
magnetic charge module, and there you go, it starts charging your
Apple watch.
Thirdly, Place your mobile devices such as iPhone 11, Samsung
Galaxy S10 or AirPods onto the surface of wireless charging area,
please remember there is always a best wireless charging spot, if
there is no reaction, just adjust the your devices until they are being
wireless charged successfully.
Fourthly, There is another USB-C port at the back of the charger
which allows you to use a USB C to lightning cable or USB C to
USB C cable to FAST charge your mobile devices.(cable not
included and a certified charging cable is highly recommended)

Includes a DC 15 V/3.5A Power Adapter
Input: DC 15/ 3.5A
Output of USB C PD Charging Port: 5V 3A 9V 2A, 12V 1.5A
Apple Watch Charger Module: 5V 1A
Qi Wireless Fast Charge 10W for Samsung, 7.5W for iPhone
Product Size: 178 x 138 x 22mm
Operating temperature: 0 to +25
Storage temperature: -20 to +70
Short Circuit Protection, Open Circuit Protection and Overcurrent
protection


Charger
station's
status
Power
connected/
Waiting
for charging
Charging
Fully
charged
FOD
Color of LED
indicator
RED light
long bright
BLUE light
breathing
RED light
long bright
RED and BLUE
light Flashing
Note: There are two cases of FOD:
(1). One case is when powered on: This is an error of the Apple Watch
Charger module's self-checking, which may be because power supply
voltage is too high, the temperature is abnormal, etc.
(2). The other case is the error of the working process: it is mainly to
detect foreign objects or the temperature is too high

7.5W fast wireless charging: iPhone 11 Pro Max, iPhone 11 Pro, iPhone 11,
iPhone XS Max, iPhone XS, iPhone XR, iPhone X, iPhone 8 Plus, iPhone 8
10W fast wireless charging: Samsung Galaxy Note 10/ Note 10 Plus/ S10
/S10 Plus/S10E, Samsung Galaxy S9/ S9 Plus/ S8/S8 Plus, Note 9, Note8,
Samsung Galaxy S7/ S7 Edge/ S6 Edge Plus/ Note 5
5W standard wireless charging: Samsung Galaxy S9,S9 Plus, Note8, S8,
Samsung S6, S6 Edge, Google Nexus 6 / 4 / 5/ 7(2013), AirPods 2,
AirPods Pro
Mobile devices wired PD fast charging Output 5V 3A 9V 2A, 12V 1.5A,
cable is not included : iPhone XR/XS/XS Max, iPhone 8/8 Plus, iPhone 7
Plus, iPhone 7, iPhone SE, iPhone 6s Plus, iPhone 6s, iPhone 6 Plus,
iPhone 6, iPhone 5s, iPad Pro 10.5-inch, iPad Pro 12.9-inch(2nd
Generation), iPad Pro 9.7-inch, iPad Pro 12.9-inch(1st Generation), iPad
Air(3rd generation), iPad Air 2, iPad Air, iPad mini(5th generation), iPad
mini 4, iPad mini 3, iPad mini 2, Pad (7th generation), iPad (6th generation),
iPad (5th generation), iPod touch (7th generation), iPod touch (6th
generation), AirPods1/2
Apple watch: Apple Watch Series 5, Apple Watch Series 4, Apple Watch
Series 3, Apple Watch Series 2, Apple Watch Series 1, Apple Watch (1st
generation).

Wireless charge station x 1
15V 3.5A DC adaptor x 1
Instruction book x 1

Use of the Made for Apple badge means that an accessory has been
designed to connect specifically to the Apple product(s) identified in the
badge, and has been certified by the developer to meet Apple performance
standards. Apple is not responsible for the operation of this device or its
compliance with safety and regulatory standards.

This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party
responsible for compliance could avoid the user's authority to operate
the equipment.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference
will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of
the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC's RF Exposure guidelines, This
equipment should be installed and operated with minimum distance
between 20cm the radiator your body: Use only the supplied antenna.

Please red all warning for your safety and optimal user experience. Please
read and follow these instructions carefully and retain for your records:
1. Mangotek charger station will generate heat when charging, always
charge in a well-ventilated area. Do not charge under pillows, blankets or
on flammable surfaces.
2. Keep Mangotek charger station away from heat sources, direct sunlight,
combustible gas, humidity, water or other liquids.
3. Do not disassemble, open, microwave, incinerate, paint or insert foreign
objects into the charger station.
4. Do not subject the charger station to mechanical shock such as crushing,
bending, puncturing or shredding, avoid dropping or placing heavy objects
on the charger station.
5. Do not short circuit the charger station or store it in a receptacle where
it may be short circuited by other metallic or conductive objects.
6. Keep out the reach of children, please read the operation instructions
including charging instructions and minimum and maximum operating
temperature.

The product is designed for use with IT equipment only.
The maximum ambient temperature during use of the appliance must not
exceed 25 degree.
Naked flame sources, such as candles, must not be placed on the product.
In case of broken cords or plugs, the product must be disposed of
If you want to clean the product, only use a dry cloth or brush.
The socket outlet shall be installed near the equipment and shall be easily
accessible
The power supply is not intended to be repaired by service personnel in
case of failure or component defect( the product can be disposed of)

The product is covered by a 12 months limited warranty from the date of
this original purchase. For more information, please contact our support
team:
Email: us@mangotek.cn
Use of the Made for Apple badge means that an accessory has been designed to connect
specifically to the Apple product(s) identified in the badge, and has been certified by the
developer to meet Apple performance standards. Apple is not responsible for the
operation of this device or its compliance with safety and regulatory standards.
Please note that the use of this accessory with an Apple product may affect wireless
performance.
Apple Watch, iPad, iPad Air, iPad Pro, iPhone, and Lightning are trademarks of Apple Inc.,
registered in the U.S. and other countries. tvOS is a trademark of Apple Inc.
Wireless Charging Stand

Summary of content (1 pages)