Safety Information

1. Plug in the DC 5V adaptor, the unit display the default time 0:00.
2. Press and hold (10) for 1-2 seconds, the display will then show 24hr.
3. Press (2)or (4) to switch between 24hr and 12hr time.
4. Press (10) again to set the hour.
5. Press (2) or (4) to change the hour.
6. Press (10) to set the minute(s).
7. Press (2) or (4) to change the minute(s).
8. Press (10) to finish once the time has been set.
1. press (9) to select AL1 or AL2,
and hold (9) will come to setting alarm.
2. Press (9)and / (2/4) to select the hour.
3. Press (9)and / (2/4) to select minute(s).
4. Press (9)and / (2/4) again to select the source(beep or FM)
5. Press (9)and / (2/4) to select the alarm vol (default vol 6).
6. Press (9) to save the alarm setting.
Clock setting
Alarm setting
1. press (9)to enable the alarm
2. The alarm will cycle through: AL1/ AL2/AL1 and AL2/ off.
When the alarm sounds, press (5. Snooze)
to delay the alarm for 9 minutes
Press any other keys to turn off the alarm
Press (5, Snooze) to select the brightness of the display
Alarm enable/disable
Stop Snooze alarm
Dimmer
If in RDS FM radio station, it is automatic updating the clock
Alarm volume