RFA-2030 Box Contents 11 AC/DC Power adaptor Before you get started please be sure to read through the safety information on pages 2-3 1 9 10 7 6 Controls&Features 5 2 3 4 8 1. Wireless charging location 2. Previous song/Down button 3. Play/Pause 4. Next song/Up button 5. Snooze/Sleep/Dimmer 6. Volume down 7. Volume up 8. Stand by mode/Function key 9.Alarm set 10. Clock Key Back Panel Controls&Features 11. USB Charging port 12. DC adaptor jack 13.
Bo�om Panel Display Controls&Features 17 16 18 20 19 15 14 21 22 14. Alarm Indicators 15. PM Indicator 16. FM Indicator 17. Bluetooth Indicator 18. Wireless charging indicator 19. Snooze indicator 20. Sleep indicator 21.USB indicator 22.
Clock setting 1. Plug in the DC 5V adaptor, the unit display the default time 0:00. 2. Press and hold (10) for 1-2 seconds, the display will then show 24hr. 3. Press (2)or (4) to switch between 24hr and 12hr time. 4. Press (10) again to set the hour. 5. Press (2) or (4) to change the hour. 6. Press (10) to set the minute(s). 7. Press (2) or (4) to change the minute(s). 8. Press (10) to finish once the time has been set. If in RDS FM radio station, it is automatic updating the clock Alarm setting 1.
Bluetooth connecting disconnecting 1. Press (8) to cycle through the modes until you get to Bluetooth mode. 2. Once in Bluetooth mode the display will flash while searching for the last connected device 3. If the most recent connected device can not be found, the i-box Slumber will search for previous devices 4. Select i-box Slumber from the Bluetooth list on your device to start pairing 5. Once pairing is successful, the Bluetooth display will stop flashing and a beep will sound 6.
Sleep mode Sleep mode lets you fall asleep while listening to Bluetooth or FM music for the set sleep duration then turns the music off. In FM radio or Bluetooth mode, press and hold (5 ,Snooze) for 2 seconds. The i-box Slumber will display the sleep timer . Press (5 ,Snooze) to cycle through the sleep time options. the available options are 20mins / 90 mins / 60 mins / 30 mins / 15 mins / 10 mins / 5 mins / sleep timer off.
If problems occur when charging or if charging does not start: Remove your smartphone from its case if the thickness of the case exceeds 5mm or if it cotains metal Check if your smartphone is placed on top of the i-box Slumber correctly as shown The charging time varies The components may heat up during the charging process. They will slowly cool down again after the charging process USB charging port 1.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
