Manual

UK
- 14 -
Note:
- Before first use, remove the plastic film so that the battery has contact with the remote
control.
- Remove the battery from the remote control during storage or prolonged non-use of the
device.
BASIC OPERATION
Switching on the device
Switch on:
- Press the [5/22] key to switch on the device.
Switch off:
- Press the [5/22] key to switch off the device.
Comment:
- Before you switch on the device, please make sure that the device is correctly connected
to the power supply.
- After the first power on, the device will start in DAB mode and a scan will be started. The
scan can be repeated at a later time. See the item "DAB Mode" in this manual.
Note:
- The unit will automatically switch to standby mode if no audio signal is active in CD, AUX,
Bluetooth or USB mode within 15 minutes. Please note that a low volume setting on the
device may be detected as "no audio signal" and the device will automatically switch to
standby mode. To switch the device back on, press the [5/22] key.