User manual
- 6 -
Input Characters/Numbers
When you operate this system, there are cases when a number or a name is required
to be
entered by you. Such cases could be entering
the
Counter quantity
.
To enter
an alpha numeric character
,
you need to use the up or down button to
scroll through
varies numbers
or letters
then
use
the
ENT /Enter or ESC /Escape button to move the
cur
sor
position right or left. O
nce you ve finished, move the cursor to OK and press
the
ENT /Escape
button.
The
below
example
is meant
to
illustrat
e how to
enter a
counter value
For example, if you want to enter a
quantity of
199
, do
the
following
:
a)
Press the down button
until 0 is displayed.
b)
Press the ENT /Enter button once to move the cursor to the next position.
c)
Press the down button repeatedly until 1 is displayed.
d)
Press the ENT /Enter button once to move the cursor to the next position.
e)
Press the down button repeatedly until 9 is displayed.
f)
Press the ENT /Enter button once to move the cursor to the next position.
g)
Press the down button repeatedly until 9 is displayed.
h)
Press the ENT /Enter button repeatedly to move the cursor to
OK. Then, press the
ENT /Enter button once to submit your selection and proceed to next step.
When you enter a number, normally it asks for
a
4 digit number. If your number is
less than 4
digits
, you need to fill the leading spaces with 0s (any leadi
ng zeros will
be skipped). An example of that would be 0234 (Two hundred and thirty four) or
0010(ten).
Specify Counter:
[ ] OK?