User manual

- 35 -
Electrical Safety Informati on
1. The power receptacle for the machine must meet the requirements stated on the
data plate on the rear of the machine. If you are not sure that your electrical supply
meets the requirements, please consult your local power company or an electrician
for ad vice.
2. The socket outlet shall be installed near the equipment and shall be easily
accessible.
3. Use the power cable that is supplied with your machine. Do not use an extension
cord or remove or modify the power cord plug.
4. Plug the power cable directly into a correctly grounded electrical outlet. If you are not
sure whether or not an outlet is correctly grounded, consult an electrician.
5. Do not use an adapter to connect any e quipment to an electrical outlet that lacks a
ground connection terminal.
6. Do not place this equipment where people might step or trip on the power cable.
7. Do not place objects on the power cable.
8. Do not push objects into slots or openings on the machine. Electrical shock or fire
may result.
9. Do not obstruct ventilation openings. These openings are used to provide proper
cooling to the machine.
Electrical Supply
1. This product shall be operated from the type of electrical supply indicted on the
product s data plate label. If you are not sure that your electrical supply meets the
requirements, ple ase consult a licensed electrician for advice.
2. Always connect equipment to a correctly grounded power outlet. If in doubt, have the
outlet checked by a qualified electrician.
This equipment must be connected to a protective earth circuit. This
equipment i s supplied with a plug that has a protective earth pin. This
plug will only fit into an earthed electrical outlet. This is a safety
feature. If you are unable to insert the plug into the outlet, contact a
licensed electrician to replace the outlet.
Disconn ect Device
The power cable is the disconnect device for this equipment. It is attached to the
back of the machine as a plug - in device. To remove all electrical power from the
equipment, disconnect the power cable from the electrical outlet .