User manual

- 27 -
8. Why some writers won t copy?
If those writers are associated with USB 2.0/Firewire IEEE 1394 connections, please make
sure the USB 2.0/Firewire connections is off and restart your system . For more information,
please refer to Appendix A: External Device (USB 2.0/Firewire 1394) Setup Guide .
Reset ba c k to default. ( Troubleshoot #10 )
Contact our tech support.
9. How do I reset my system back to default?
a) Go to menu 4 . Setup .
b) Press the ENT /Enter button.
c) Press down button until you see
Load Default on the 2
nd
line
d) Press ENT /Enter button .
e) Wait for 3 - 4 seconds.
f) Press ESC /Escape button.
g) Press down button until you see
Shutdown on the 2
nd
line .
h) Press ENT /Enter button.
i) Press ENT /Enter button.
j) Power off the system and power it back on . All settings should be resto red back to
default.
DISCMAKERS
X.xx
4
.
Setup
Setup
1.
Select Burn Speed
Setup
11
.Load Default
Load Default
Press OK to Continue
Setup
11.Load Default
DISCMAKERS X.xx
4
. Setup
DISCMAKERS
X.xx
7. Shutdown
Shutdown
Press OK to Shutdown
System Checking OK!
Ready to Power Off