User manual

ManualsBrandsReflex ManualsBusiness equipmentFlash Duplicator

- 22 -

This setting will allow you to choose which language you prefer to navigate the controller

system of the duplicator.

4.8.

Counter

This option will allow you to enable/disable the Counter feature by turning this feature

ON or OFF. This feature will notify you how many discs have been copied and how

many discs are left to go.

4.9.

Auto Start

This setting allows you to choose Auto

, Full, or Off. If Auto is selected, this feature

automatically starts the duplication process when

the

writer drive detect

recordable

media inside,. If Off is selected, the copy process requires you to press the "ENT"/Enter

button to start the duplicatio

n. This feature applies to applications inside the operation

menu such as COPY, TEST, TEST+COPY, COPY+COMPARE, etc

4.10.

Load Default

This function will reset all of the options back to manufacture's default. You can perform

this function if your system is act

ing abnormal. You'll need to perform "Shutdown" and

restart the system in order for this to take effect.

4.11.

Advanced Settings

Mixed Media Code This function will allow the duplicator to copy usinge media with

different media codes. Caution this should not be selected unless there is a specific

problem as it will slow burn speeds.

UTILITIES

5.1.

Disc Info

If you are uncertain about the type of blank recordable media you are using, the system

is equipped with the disc info function to help identify and notify yo

u of the disc

information encoded within. This feature will identify your blank recordable media's

format, capacity; manufacture ID as well as the media's certified writing speed. Please

note that limited information will be displayed for media in the Rea

der drive.

5.2.

System Info

By entering this menu, you will be able to see the hardware and software information

pertaining to your system.

5.3.

Device Info

By entering this menu, you will be able to see the information for devices built inside

your system, such

as the drives. That information includes but not limited to manufacture,

model number, etc.

5.4.

Update Firmware