User manual
- 20 -
Chapter 4: Menu Overview
1.
COPY
This menu will guide you to make CD/DVD/BD copies. For more information, please refer to
Make Disc-
to
-Disc Copies .
2.
ADVANCED COPY OPTIONS
This menu will guide you to make a simulation of the copying process. During this simulation
process, all write once recordable discs such as (DVD
-
R, CD
-
R) will be reusable. The
purpose of performing such simulation is to ensure error free duplication.
Due to the physical limitation of DVD+R/RW & BD
-
R/RE rec
ordable format, you
cannot perform this procedure on these formats. If you do so, you will encounter
a
failure messages.
If you are using CD
-
RW/DVD
-
RW discs as your blank media during the
simulation, any content that may have been recorded inside those
discs will be
permanently ereased.
2.1.
Test + Copy
This menu will guide you to perform the simulation of copying process and if everything
passes during the simulation, the real copying process will be performed. If there s an
error encountered during the simulation, an error message will be displayed and the
copying process will not be initiated.
2.2.
Copy + Compare
This menu will guide you to make copies, after which, it will perform an additional
comparison process automatically to ensure data correctness.
2.3.
Cop
y + Verify
This menu will guide you to make copies, after which, it will perform an additional
process to verify playability.
3.
AUDIO
This process will guide you to mix an Audio CD from various tracks among different Audio
CDs. For more information, pleas
e refer to Mix Audio Tracks on page
12
.
4.
SETUP
4.1.
Select Burn Speed
This menu will guide you to adjust the duplication speed on various duplication job types.
For more information, please refer to "Select the Duplication Speed" on page
10
.
4.2.
Select Source